BondTAC™ 2700
WATERPROOFING PATCH & CRACK FILLER
DESCRIPTION
BondTACT 2700 is a specifically formulated, high viscosity gel for repairing cracks, for sealing and waterproofing of construction joints, waterproofing concrete structures, restoring deteriorated concrete and repairing damaged roofing materials.
FEATURES & BENEFITS
- Effective barrier against moisture, air, vapour & water transmission
- Recommended for patching and sealing moving cracks and open joints
- Waterproof - Repels Water!
- Fire Resistant
- Resistant to mould, fungus & bacterial growth
- Sticks to virtually any surface
- Easily applied at normal & low temperatures
- Flexible - will not crack or peel
- Trowel Grade
- Paintable - can be used under water-based decorative paint finishes. Not to be used with oil-based paints
COMPLIANCE & PERFORMANCE
- ASTM E 96-05 - STANDARD TEST METHODS FOR WATER VAPOR TRANSMISSION OF MATERIALS
- ASTM C 1306-08 - STANDARD TEST METHOD FOR HYDROSTATIC PRESSURE RESISTANCE OF A LIQUID-APPLIED WATERPROOFING MEMBRANE
WHERE TO USE
Use in combination with BondTACT 1500 Elastomeric Adhesive Membrane to seal and repair gaps, seams, cracks, damaged and crumbled surfaces on virtually all building materials.
Prime the surface to be filled with or repaired with BondTACT 1500 and allow it to penetrate the substrate. Apply BondTACT 2700 directly on the coated surface. For cracks and gaps, use a flat putty knife. For corner joints and angled applications, use a V-shaped grouting tool. For applications requiring additional reinforcement, prime the surface with BondTACT 1500 Elastomeric Adhesive Membrane, adhere a patch of fiberglass drywall mesh and apply BondTACT 2700 as noted above.
APPLICATION INSTRUCTIONS
WARNING! EXTREMELY FLAMMABLE! VAPOURS MAY IGNITE EXPLOSIVELY! VAPOURS HARMFUL! MAY IRRITATE EYES AND SKIN! USE ONLY IN WELL VENTILATED CONDITIONS! KEEP OUT OF REACH OF CHILDREN!
Open all windows and doors to prevent buildup of vapours. Keep away from heat, sparks or open flame. Do not smoke. Extinguish all flames and pilot lights. Turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapours have dissipated. Do not use in areas where static electrical sparks may be generated. Keep container tightly closed when not in use. Store in a cool, dry place.
Surfaces to be coated must be sound and clean, dry and free from dust, dirt, grease, oil or other foreign matter. Apply by brush, roller or spray. Can be applied over a wide temperature range.
LIMITATIONS
BondTACT 2700 is not recommended for use with extruded polystyrene (XPS) insulation. Solvent in the product will attack XPS foam board. Use BondTACT 2600 Waterproofing Patch & Crack Filler with polystyrene products.
PACKAGING
Available in 5-gallon (18.9L) pails, 1-gallon (3.785L) cans and 1-quart (946ml)
CLEAN UP
Use BondTACT 800 Diluent & Surface Lubricant for cleaning tools, spills and to remove excess product. 800 may also be used to lubricate BondTACT coated surfaces to permit adjustments in order to attain the proper fit of components.
PRODUCT PROPERTIES
| Polymer Base | Synthetic Rubber |
| Non-Volatiles | 60 - 62% |
| Consistency | High viscosity gel |
WARRANTY
Before using, the user shall determine the suitability of the product for its intended use and the user alone assumes all risks and liabilities whatsoever in connection therewith. Bondtac Technologies Incorporated assumes no responsibility for personal injury or property damage to vendees or users or third parties, caused by the improper use of this product. Such vendees or users assume all risks with the use of the material.
