BondTAC™ 1500
LOW-VOC WATERPROOF ELASTOMERIC ADHESIVE MEMBRANE
DESCRIPTION
BondTAC™ 1500 is a specially formulated, Low-VOC elastomeric membrane and adhesive coating with multiple waterproofing applications.
FEATURES & BENEFITS
- LOW-VOC
- Effective barrier against moisture, air, vapour & water transmission
- Waterproof - Repels Water!
- Fire Resistant
- Resistant to mould, fungus & bacterial growth
- Aggressive Tack - quick setting
- Sticks to virtually any surface
- Easily applied at normal & low temperatures
- Flexible - will not crack or peel
- Paintable - can be used under water-based decorative paint finishes. Not to be used with oil-based paints
COMPLIANCE & PERFORMANCE
- ASTM E 96-05 - STANDARD TEST METHODS FOR WATER VAPOR TRANSMISSION OF MATERIALS
- ASTM C 1306-08 - STANDARD TEST METHOD FOR HYDROSTATIC PRESSURE RESISTANCE OF A LIQUID-APPLIED WATERPROOFING MEMBRANE
- CAN/ULC-S102 - STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES
- SOR-2009/264 - VOC CONCENTRATION LIMITS FOR ARCHITECTURAL COATINGS
WHERE TO USE
BondTACT 1500 may be applied to interior surfaces, such as basement walls and floors and exterior cavity walls to prevent air infiltration, vapor transmission and water penetration. Use 1500 on exterior and interior concrete and concrete block walls to protect from moisture and water infiltration where exterior application is not readily accessible. Surface must be dry at time of application. BondTACT must penetrate a dry, porous surface in order to prevent further moisture and water infiltration.
Apply coating to masonry, concrete, cement board, gypsum board, all exterior sheathing boards, such as Dens GlassŪ and glass-mat sheathing, aluminum, steel, wood substrates, roofing components and shingles; window and door framing and sills to produce a water & vapour barrier. BondTACT 1500 may be used as a waterproofing adhesive membrane for concrete, stone and other multipurpose applications where the use of an elastic waterproofing membrane is required to minimize water penetration of surfaces subject to hairline cracks.
BondTACT 1500 provides an excellent crack isolation barrier for shower enclosures, shower pans and tub surrounds. It may also be used as an excellent primer for self-adhesive air & vapour barrier membranes, systems or components over porous and non-porous substrates and as a primer to enhance the adhesion of silicone and polyurethane sealants.
BondTACT 1500 may be used to adhere virtually any substrate to each other, including, laps of polyethylene sheets, housewraps, wood, metal, gypsum board and most other construction materials. See the section on limitations.
BondTACT 1500 may also be used as a corrosion protective primer for all metal components, fasteners, sheet metal, etc. In applications where a topcoat finish is desirable, any protective coating may be used with the following exception: Oil-based enamels and varnishes are not suitable with BondTACT waterproofing products.
When dry, this product's adhesive characteristics will allow it to be used to adhere rigid polystyrene insulation to sheathing boards, concrete and other surfaces.
APPLICATION INSTRUCTIONS
WARNING! EXTREMELY FLAMMABLE! VAPOURS MAY IGNITE EXPLOSIVELY! VAPOURS HARMFUL! MAY IRRITATE EYES AND SKIN! USE ONLY IN WELL VENTILATED CONDITIONS! KEEP OUT OF REACH OF CHILDREN!
Open all windows and doors to prevent buildup of vapours. Keep away from heat, sparks or open flame. Do not smoke. Extinguish all flames and pilot lights. Turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapours have dissipated. Do not use in areas where static electrical sparks may be generated. Keep container tightly closed when not in use. Store in a cool, dry place.
Surfaces to be coated must be sound and clean, dry and free from dust, dirt, grease oil and other foreign matter. Apply the coating with a roller or brush. Surfaces coated with BondTACT1500 can be bonded as soon as 1 hour and up to 96 hours later. BondTACT cures within 24 to 72 hours. Final bond strength is achieved in approximately 1 week. Coated surfaces must be kept free of dust, dirt and foreign matter. Can be applied over wide temperature ranges.
LIMITATIONS
BondTACT 1500 is not recommended for use with foam rubber and polystyrene insulation. Solvent in the product will attack rigid polystyrene insulation (XPS Board). Use BondTACT S-1430 with XPS board.
PACKAGING
Available in 5-gallon (18.9L) pails, 1-gallon (3.785L) cans and 1-quart (946ml)
CLEAN UP
Use BondTAC 800 Diluent & Solvent Cleaner when necessary, to thin the coating, to clean tools and clean up spills and remove excess product.
PRODUCT PROPERTIES
| Non-Volatiles | 50% |
| Consistency | Mobile Liquid |
| Specific Gravity | 0.97 (@ 26°C) |
| Tack-up Time | 1 Hour |
| Coverage | 225 – 500 sq. ft. per gallon (depending on the porosity and texture of the application surface) |
WARRANTY
Before using, the user shall determine the suitability of the product for its intended use and the user alone assumes all risks and liabilities whatsoever in connection therewith. Bondtac Technologies Incorporated assumes no responsibility for personal injury or property damage to vendees or users or third parties, caused by the improper use of this product. Such vendees or users assume all risks with the use of the material.
