BondTAC™ 2600
WATERPROOFING PATCH & CRACK FILLER (STYROFOAMŪ - SAFE)
DESCRIPTION
BondTACT 2600 is a specifically formulated, high viscosity gel for repairing cracks, for sealing and waterproofing of construction joints, waterproofing concrete structures, restoring deteriorated concrete and repairing damaged roofing materials. This product is safe for use with XPS & EPS foam board insulation and construction materials
FEATURES & BENEFITS
- StyrofoamŪ Safe - will not attack polystyrene insulation
- Fast Cure
- Fire Resistant
- Waterproof - Repels Water!
- Resistant to mould, fungus & bacterial growth
- Sticks to virtually any surface
- Trowel Grade
- Easily applied at normal & low temperatures
- Flexible - will not crack or peel
- Paintable - can be used under decorative paint finishes. Not to be used with oil-based paints
COMPLIANCE & PERFORMANCE
- ASTM E 96-05 - STANDARD TEST METHODS FOR WATER VAPOR TRANSMISSION OF MATERIALS
- ASTM C 1306-08 - STANDARD TEST METHOD FOR HYDROSTATIC PRESSURE RESISTANCE OF A LIQUID-APPLIED WATERPROOFING MEMBRANE
WHERE TO USE
BondTAC™ 2600: Use in combination with BondTACT S-1430 elastomeric membrane to seal and repair gaps, seams, cracks, damaged and crumbled surfaces on virtually all building materials.
APPLICATION INSTRUCTIONS
Prime the surface to be filled with or repaired with BondTACT S-1430 and allow it to penetrate the substrate. Apply BondTACT 2600 directly on the coated surface. Using a trowel or flat putty knife, fill cracks, gaps, and repair surfaces and fissures on concrete, masonry and other surfaces. For corner joints and angled applications, use a V-shaped grouting tool. For applications requiring additional reinforcement, prime the surface with BondTACT S-1430 Elastomeric Adhesive Membrane, adhere a patch of fiberglass drywall mesh and apply BondTACT 2600 as noted above.
BondTACT 2600 can be applied over a wide temperature range. Surfaces to be coated must be sound and clean, dry and free from dust, dirt, grease, oil or other foreign matter.
WARNING! EXTREMELY FLAMMABLE! VAPOURS MAY IGNITE EXPLOSIVELY! VAPOURS HARMFUL! MAY IRRITATE EYES AND SKIN! USE ONLY IN WELL VENTILATED CONDITIONS! KEEP OUT OF REACH OF CHILDREN!
Open all windows and doors to prevent buildup of vapours. Keep away from heat, sparks or open flame. Do not smoke. Extinguish all flames and pilot lights. Turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapours have dissipated. Do not use in areas where static electrical sparks may be generated. Keep container tightly closed when not in use. Store in a cool, dry place.
PACKAGING
Available in 5-gallon (18.9L) pails, 1-gallon (3.785L) cans and 1-quart (946ml)
CLEAN UP
Use BondTACT 800S Diluent & Surface Lubricant for cleaning tools, spills and to remove excess product. 800S may also be used to lubricate BondTACT coated surfaces to permit adjustments in order to attain the proper fit of components.
PRODUCT PROPERTIES
| Non-Volatiles | 61% |
| Consistency | High viscosity gel |
WARRANTY
Before using, the user shall determine the suitability of the product for its intended use and the user alone assumes all risks and liabilities whatsoever in connection therewith. Bondtac Technologies Incorporated assumes no responsibility for personal injury or property damage to vendees or users or third parties, caused by the improper use of this product. Such vendees or users assume all risks with the use of the material.
